Thursday, January 28, 2016
Steintrike Wild One eTrike Conversion
The conversion work for the trike is complete and I've finished the build videos and posted them on several recumbent related Facebook sites. Here are the videos:
Wednesday, November 25, 2015
20151124 Battery Pack Testing again
I got out for another ride yesterday to continue to characterize the battery range. This time I tried to ride in the 10 to 12 mph range. I managed to average 14.1 MPH so I'll need to make another run. The estimated range is somewhat better only up to 59 Mi. Controlling average speed turns out to be harder than I'd realized.
Monday, November 23, 2015
20151123 Battery Back and Testing Again
I had an issue with my battery. Turned out there was some defect in the charging connector and when I went to disconnect it the leads shorted destroying both the battery and charger side XLR connectors. I returned the battery and charger to Allcell who sorted things and sent it back without issue.
Now that the battery is back I'm continuing to test to characterize the range. I went for my first reasonably long ride today (temps in the 30s so a bit brisk). Here's the data:
Here's summary results to date:
It looks like something in the 10 to 12 MPH range is a sweet spot.
There is no doubt that I'll need a second battery for the TransAm and that I'll need to manage my speed based on required range for the day.
Now that the battery is back I'm continuing to test to characterize the range. I went for my first reasonably long ride today (temps in the 30s so a bit brisk). Here's the data:
Route - Map says 19 miles. CA says 24. There were some hills.
I cruised at 15 to 20 MPH for most of the ride and averaged about 16 MPH while pedaling continuously. The bike and battery can easily sustain this speed. However range is sharply reduced to around 45 miles.
It looks like something in the 10 to 12 MPH range is a sweet spot.
There is no doubt that I'll need a second battery for the TransAm and that I'll need to manage my speed based on required range for the day.
Monday, October 19, 2015
Ride 20151016 - Miriam, Barbara, Marc & I go for a ride
Out for a ride with Miriam, Barbara & Marc. 6 miles through some nearby neighborhoods. Marc has a new bike and Miriam rode one of Barbara's. Good time with friends.
https://www.youtube.com/watch?v=taRYFKW6g9A
https://www.youtube.com/watch?v=taRYFKW6g9A
Sunday, October 18, 2015
eRides
I've done a number of rides now on the electric trike, sometimes with BB and sometimes by myself. Here is some data from ridewithgps.
When I'm with BB my speed averages around 8 to 9 mph. By myself, speeds are significantly faster. I've been trying to characterize speed vs amp hour (battery consumption). Here's the data so far and a chart.
When I'm with BB my speed averages around 8 to 9 mph. By myself, speeds are significantly faster. I've been trying to characterize speed vs amp hour (battery consumption). Here's the data so far and a chart.
A couple of things are clear. Higher speeds use MUCH more battery. Likewise consumption is MUCH worse when there are serious hills.
It's still a bit early to know what to expect but it looks like with this setup I should have a range anywhere between 70 mi and 100 mi depending on speed, hills, and how much pedaling I do.
Sunday, October 4, 2015
New trike work table
After a bit of experimentation here's what I ended up doing to make a work table for the Wild One.
The table is low enough that I can lift the rear wheel onto the table without the boom dragging (only just). Once the rear wheel is up, it's just a matter of lifting the front and rolling the trike onto the table. The table is just a bit narrow for the front wheels so I used a piece of 3/4" plywood to make it a bit wider. There are blocks under the plywood to keep it from twisting on the table. Two blocks on top are 'stops' for the front wheels so the trike doesn't roll off.
The three 'stands' are free standing and movable so I can load any trike. The two front stands are taller than the rear stand so the trike is in the same plane as when on the ground. They are assembled without fasteners/glue out of 'notched' MDF pieces. A bit of pipe insulation serves as padding. Here are some closeups of the stands.
This is by far the best of the approaches I tried.
The table is low enough that I can lift the rear wheel onto the table without the boom dragging (only just). Once the rear wheel is up, it's just a matter of lifting the front and rolling the trike onto the table. The table is just a bit narrow for the front wheels so I used a piece of 3/4" plywood to make it a bit wider. There are blocks under the plywood to keep it from twisting on the table. Two blocks on top are 'stops' for the front wheels so the trike doesn't roll off.
The three 'stands' are free standing and movable so I can load any trike. The two front stands are taller than the rear stand so the trike is in the same plane as when on the ground. They are assembled without fasteners/glue out of 'notched' MDF pieces. A bit of pipe insulation serves as padding. Here are some closeups of the stands.
Friday, October 2, 2015
Ordered ebike/etrike parts)
After considering many options I've placed an order for an ebike kit.
For the moment I've only ordered one battery (48V x 20 AH). That's enough to allow me to characterize the range and ride locally without issue. I'll likely need another (possibly two) for the TransAm to get the targeted 200 km range. I placed the order a couple of weeks ago and it should arrive tomorrow.
The battery came today and is sitting on charge.
I've ordered a faster charger but this one came with the battery and is enough to get things started.
Items Shipped
| Product Name | SKU | Qty Shipped |
|---|---|---|
EZEE REAR KIT, ADVANCED PAS | K:eZeeR_Adv-EM:eZee20R-C:C3625-EZ_R-KIT_TA:TorqArm_V4-CAP:CA3_Switch-KIT_CA:CA3-DPS-KIT_CAP:PAS_12P_Chr-KIT_T:T-Thumb-E:EbrakeWuxD-F:FW9Spd1132 | 1 |
Motor Wheel Size
| ||
1 x eZee20R US$550.00
| EM:eZee20R | |
Freewheel?
| ||
1 x FW9Spd1132 US$32.00
| F:FW9Spd1132 | |
Controller
| ||
1 x C3625-EZ_R US$160.00
| C:C3625-EZ_R | |
V3 Cycle Analyst
| ||
1 x CA3-DPS US$140.00
| KIT_CA:CA3-DPS | |
Pedal Sensor Type
| ||
1 x PAS_12P_Chr US$20.00
| KIT_CAP:PAS_12P_Chr | |
Throttle Choice
| ||
1 x T-Thumb US$10.00
| KIT_T:T-Thumb | |
Include 3 Position CA3 Switch (for changing presets or limits)
| ||
1 x CA3_Switch US$12.00
| CAP:CA3_Switch | |
Torque Arm?
| ||
1 x TorqArm_V4 US$35.00
| KIT_TA:TorqArm_V4 | |
eBrake Cutoffs?
| ||
1 x EbrakeWuxD US$24.00
| E:EbrakeWuxD |
Shipment #100003218 |Print Shipment
| Track this shipment | |
| Tracking Number(s): | 2015-10-01 |
|---|---|
Items Shipped
| Product Name | SKU | Qty Shipped |
|---|---|---|
B4820_LIM_AC | BK:B4820_LiM_AC-B:B4820LiM-AC-BP:BattBag-RB3-KIT_CG:Satiator608 | 1 |
Battery Pack
| ||
1 x B4820LiM-AC US$1,295.00
| B:B4820LiM-AC | |
Include Battery Bag with Key Switch Harness
| ||
1 x BattBag-RB3 US$45.00
| BP:BattBag-RB3 | |
Upgrade to Satiator Charger
| ||
1 x Satiator Upgrade US$250.00
| KIT_CG:Satiator608 | |
DANGEROUS GOODS BATTERY SHIPPING FEE - REMOVE IF LOCAL PICKUP | Shipping:Fedex DG | 1 |
For the moment I've only ordered one battery (48V x 20 AH). That's enough to allow me to characterize the range and ride locally without issue. I'll likely need another (possibly two) for the TransAm to get the targeted 200 km range. I placed the order a couple of weeks ago and it should arrive tomorrow.
The battery came today and is sitting on charge.
I've ordered a faster charger but this one came with the battery and is enough to get things started.
Subscribe to:
Posts (Atom)












